How to Download and Install Fastboot Driver for Micromax A27 Factory
If you want to flash custom ROMs, root your device, or perform other advanced tasks on your Micromax A27 Factory, you will need to install the fastboot driver on your computer. Fastboot is a protocol that allows you to communicate with your device's bootloader and modify its partitions. In this article, we will show you how to download and install the fastboot driver for Micromax A27 Factory in a few simple steps.
download fastboot driver for micromax a27 factory
Step 1: Download the Fastboot Driver
The first thing you need to do is to download the fastboot driver for Micromax A27 Factory from the official website. You can use the link below to download the driver file:
Download Fastboot Driver for Micromax A27 Factory
The file size is about 8 MB and it is in ZIP format. You will need to extract it using a file manager or a compression tool.
Step 2: Install the Fastboot Driver
After downloading and extracting the fastboot driver file, you will see a folder named \"fastboot-driver-for-micromax-a27-factory\". Open it and you will find another folder named \"Driver\". Inside it, you will see two files: \"android_winusb.inf\" and \"androidusb.sys\". These are the driver files that you need to install on your computer.
To install the fastboot driver, follow these steps:
Connect your Micromax A27 Factory to your computer using a USB cable.
Open the Device Manager on your computer. You can do this by right-clicking on the Start menu and selecting Device Manager.
Look for your device under the \"Other devices\" or \"Portable devices\" section. It may be labeled as \"Android\" or \"Unknown device\". Right-click on it and select Update driver.
Select Browse my computer for driver software.
Select Let me pick from a list of available drivers on my computer.
Select Have disk.
Browse to the folder where you extracted the fastboot driver file and select the \"android_winusb.inf\" file. Click Open.
Select Android Bootloader Interface from the list of compatible hardware and click Next.
Click Install if prompted by a security warning.
Wait for the installation to complete and click Finish.
Congratulations! You have successfully installed the fastboot driver for Micromax A27 Factory on your computer. You can now use fastboot commands to flash custom ROMs, root your device, or perform other advanced tasks on your Micromax A27 Factory.
Step 3: Enable USB Debugging and OEM Unlocking on Your Device
Before you can use fastboot commands on your Micromax A27 Factory, you need to enable USB debugging and OEM unlocking on your device. These are developer options that allow you to access and modify your device's bootloader and system partitions. To enable them, follow these steps:
Go to Settings on your device and tap About phone.
Tap Build number seven times until you see a message saying \"You are now a developer\".
Go back to Settings and tap Developer options.
Enable USB debugging by toggling the switch next to it.
Enable OEM unlocking by toggling the switch next to it.
Tap OK if prompted by a warning message.
You have now enabled USB debugging and OEM unlocking on your Micromax A27 Factory. You can now proceed to use fastboot commands on your device.
Step 4: Boot Your Device into Fastboot Mode
To use fastboot commands on your Micromax A27 Factory, you need to boot your device into fastboot mode. Fastboot mode is a special mode that allows you to communicate with your device's bootloader and modify its partitions. To boot your device into fastboot mode, follow these steps:
Disconnect your device from your computer if it is connected.
Power off your device completely.
Press and hold the Volume Down and Power buttons simultaneously until you see the Micromax logo on the screen.
Release the buttons when you see the fastboot mode screen. You will see a text saying \"FASTBOOT MODE\" at the bottom of the screen.
You have now booted your device into fastboot mode. You can now connect it to your computer using a USB cable and use fastboot commands on it. 0efd9a6b88